Initio I/O HIGHWAY Page 7 User Manual Download

Page: 7 / 62

initio

Product Features

PCI Compatibility:

The PCI Bus is a 32-bit bus with multiplexed address and data

lines.

I/O

HIGHWAY

is compliant with PCI 2.1 bus protocol, electrical and mechanical

specifications.

Plug and Play:

I/O

HIGHWAY

has an on-board read only memory (ROM) to provide the

necessary configuration mechanisms for installation, configuration, and booting

without user intervention.

133 MBytes per second PCI burst mode:

The 32-bit data path for the PCI bus

structure running in a synchronous mode at 33 MHz gives maximum operating speeds

of 133 MBytes/second.

10 MBytes per second data transfer:

Up to 10 MBytes/sec synchronous FastSCSI

data transfers for

I/O

HIGHWAY

Programmable/Automatic SCSI Termination:

Allows the user to choose between

programmable or auto-SCSI termination, eliminating the need to remove system unit

covers each time a change is made in SCSI bus configuration.

Onboard BIOS supports MS-DOS, Windows 3.1x:

I/O

HIGHWAY

has the necessary

software support

on-board

allowing you to run disk drive operations for MS-DOS and

Windows 3.1x

without

any extra drivers.

Windows 95, Windows NT, OS/2, SCO UNIX, UnixWare, Linux and NetWare

Driver Support:

I/O

HIGHWAY

is compatible with all major operating systems.

ISGE

Integrated Scatter/Gather Engine:

Initio host adapters have incorporated

advanced hardware functions to provide increased performance in all Scatter/Gather

operations.

No Hardware Jumpers to set:

Initio host adapters embed an intelligent software

utility to set configuration options.

Compatible with Hard Disk, CD-ROM, Optical, Tape, Printer, and other SCSI

products:

I/O

HIGHWAY

is a complete FastSCSI implementation. All peripherals are

compliant with SCSI-2 and SCSI-1 and can be used with

I/O

HIGHWAY

64-byte FIFO:

A 64-byte FIFO buffer is designed into

I/O

HIGHWAY

and is utilized as a

caching buffer to manage PCI to SCSI bus structure timing for data and command

transfer.

Product Features/Specifications

Summary of Contents for I/O HIGHWAY































































Search results

Summary of Contents for I/O HIGHWAY

Reviews:

Related manuals for I/O HIGHWAY

Brands by name

Popular brands

Initio I/O HIGHWAY, User Manual

Search results

Summary of Contents for I/O HIGHWAY

Reviews:

Related manuals for I/O HIGHWAY

Brands by name

Popular brands