29
initio
®
Updating the Initio Windows 95B (OSR2) Device Driver
1
Once a Windows 95 session is established, select
MY COMPUTER
from your desktop.
Execute the following steps:
Select
CONTROL PANEL
from within the MY COMPUTER group
Select
SYSTEM
from within the CONTROL PANEL group
Select the
DEVICE MANAGER
tab from within the SYSTEM group
Select the
SCSI CONTROLLERS
category from within the DEVICE MANAGER listing
Select the
Initio INI-9XXXU/UW PCI SCSI Host Adapter
sub-categories from
within the SCSI CONTROLLERS listing (or any other INI-9100U/UW class of drivers if
you are using an older Initio product)
2
In the INI-9XXXU/9XXXUW SCSI HOST ADAPTER PROPERTIES window, select the
DRIVER
tab
,
then select
UPDATE DRIVER...
Select
Next
Select the
OTHER LOCATION
Type
A:\WIN95
, then select
OK
Select
FINISH
At promptInsert Disk labled INI-9XXXU/9XXXUW driver , select
OK
At prompt Copying file, replace the highlighted directory path with
A:\Win95
,
then select
OK.
This will complete loading the INI910U.MPD driver onto your hard
disk drive.
This completes updating the Host Adapter Driver. Follow the on-screen directions to
restart you computer and activate the new driver.
It is highly recommended that you verify Initios Windows 95 device driver by selecting
MY COMPUTER
from the desktop. Then select
CONTROL PANEL
:
Select
SYSTEM
from within the CONTROL PANEL group,
Select
DEVICE MANAGER
from within the SYSTEM group,
Select
SCSI CONTROLLER
from within the DEVICE MANAGER listing, and
Select the
Initio INI-9XXXU/UW PCI SCSI Host Adapter
entries from within the
SCSI CONTROLLER listing. If This device is working properly is displayed on
your screen, the driver has been correctly installed.
Microsoft Windows 95/95b (OSR2) Driver Installation
Summary of Contents for I/O HIGHWAY
