1. Description of Flex5/R
1.1 Description of parts
D
C
B
E
[A]
I-BUS terminals
[B]
‘ENROLL’ button
[C]
LED ‘P’ (enrolling / setting address)
[D]
LEDs ‘L1, ..., L5’ (output status / setting
address)
[E]
Relay output terminals
LED signalling
The ‘P’ LED, during the automatic enrolling phase via the control panel, will blink rapidly.
LEDs ‘L1, ..., L5’, during normal functioning of the device, indicate the status of the outputs:
l
LED on, relay active
l
LED off, relay inactive
During the manual addressing process, LEDs ‘P’ and ‘L1, ..., L5’ indicate the address of the peripheral, in
accordance with the table provided in the
paragraph.
4
Installation and programming manual- 101
