Flex5/R | © 2021 Inim Electronics S.r.l.
15
3.1 Programming the expansion boards
3. Programming of Flex5/R
The programming of Flex5/R devices, as peripherals of the Inim Electronics control panel, can be carried
out either via software or from a keypad.
3.1 Programming the expansion boards
Via software
By clicking on the ‘Expansions’ button on the menu on the left, the section on the right
will show a list of the configured expansions.
Selecting one of the options will allow you to configure the parameters of the single peri-
pheral by clicking on the
button.
Via keypad
Type in Code
(Installer)
, PROGRAMMING Expansions, ChoosePeripheral
This section allows the programming of the various options of the selected expansion.
3.1.1 Expansion parameters
Parameter
Software section
Installer menu sec-
tion
Description
Description string of the expansion (to be customized by the
installer).
Configured expan-
sions, selected
expansion
Expansions, Choo-
sePeripheral, "expan-
sion"
Sound on
output
This option that enables/disables the buzzer of the selected
expansion when the relevant T1 terminal is activated as an out-
put.
Expansions, Choo-
sePeripheral, "expan-
sion", Options
Disable tam-
per pro-
tection
This option enables/disables tamper on the peripheral (ena-
bled by default).
Individual expansion parameters
