manualshive.com logo in svg

INIM Electronics SmartLink-G, Programming Manual

Share
Download
INIM Electronics SmartLink-G Programming Manual Download Page 44

44

Programming the SmartLink-GP

Programming manual

Note:

The examples are only suggestions. The programmable
events are fully customizable.

3.12

Remote control of the SmartLink-GP via 
SMS text messages

SmartLink-GP can manage SMS text commands from remote phones using
the GSM network:

• Arm or disarm the system
• activate one or more outputs
• activate the buzzer
• send SMS text reply to status enquiry   

Attention:

If an output has already been associated with one of
the events included in 

Appendix D Inhibit events for

output control

, it cannot be used as a command

output.

Observe the spaces which separate the user code. Commands in uppercase
text.

3.12.1 Commands without user code

SmartLink-GP will accept incoming SMS commands without user code entry,
from phone numbers which have been duly programmed under  

Phone

Expiry event
 SIM

SmartLink-GP will trigger the 

SIM expiry event 

 in 

accordance with the set date 
and time.

For example, to send 
SMS text  'SIM 
expiry' reminder to 
the user.

NOTE

 Only for 

Italian GSM 
operators:
Each time you top up 
your SIM card credit 
(using a pre-paid 
phonecard), 
SmartLink will 
update the reminder 
date, in such way as 
to match the new 
expiry date of the 
SIM card (renewed 
each time you top up 
credit).

Parameter

Description

Note

Summary of Contents for SmartLink-G

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands