Programming the SmartLink-GP
33
Programming manual
Black list -
Outgoing
If selected, calls to the
number concerned will be
barred. Wildcard can be used
for the first five numbers of
the list. In this way, all
outgoing calls to numbers
starting with the digits
concerned will be barred.
For example, you can
bar outgoing calls to
'pay numbers'
(e.g.
"1661212", "899*",
etc.).
NOTE
You must enter at least
two digits followed by
‘*’, and not more the
seven digits for
Wildcard numbers.
Caller ID —
Outputs 1-5
If selected, the call coming
from the number concerned
will activate the
corresponding output. The
output must be configured as
a pulse output in the
Inputs
/
Outputs
window.
For example, you can
program a call to open
a gate or garage.
NOTE
If an output has already
been associated with
one of the events
included in
Appendix D
Inhibit events for
output control
, it cannot
be used as a command
output.
Caller ID -
Buzzer
If selected, a call from the
number concerned will
activate the SmartLink-GP
buzzer which will emit 3
beeps at one second
intervals. If the call is from a
black list number, the
SmartLink-GP will emit 5
audible signals.
For example, to signal
calls from nuisance
callers or specific phone
numbers.
Caller ID -
Arm
- Dis.
If selected, and if the
intrusion control facility of
the SmartLink is operating,
incoming calls from the
number concerned will arm/
disarm the panel (input 5)
and end automatically. The
panel will send a feedback
ring.
For example, to avoid
using the keyswitch.
NOTE
The panel will send a 4
to 8 second feedback
ring as confirmation of
the performed arm/
disarm operation.
Parameter
Description
Example
