INHECO
Doc ID: 900905-000
October 2018
08
2.3.
Functional Elements
The OVT set primarily consist of the Measurement Head and the Data Logger.
Measurement Head and Data Logger are connected by a 1.5m cable.
Fig.2: OVT set (Measurement Head and Data Logger) showing the connection of both
devices
NOTE
Never unplug the connector of the Measurement Head from the OVT
Data Logger. It is
secured with a calibration void label. INHECO will not take any liability for quality of the
measurement performed with the OVT if the Measurement Head was disconnected
before.
2.3.1.
Functional Elements of the OVT
-
OVT Measurement Head Sensing Elements
The OVT Measurement Head has 5 sensing elements located at the bottom of the
Measurement Head to verify the temperature of the ODTC
®
Mount and 2 sensing
elements located at the top of the Measurement Head to verify the temperature of the
ODTC
®
Lid.
Fig.3: Sensing elements at the bottom of the Measurement Head