INHECO
Doc ID: 900905-000
October 2018
04
1
IMPOrTANT NOTES
1.1.
General Information
Read the user instructions completely. The manual explains how to handle the ODTC
®
Verification Tool (abbreviated: OVT
) with Part#: 790200x.
Part# 7902000-set consists of:
Data Logger connected with the OVT Measurement Head 96 well and Software
Part# 7902001-set consists of:
Data Logger connected with the OVT
Measurement Head 384 well and Software
In the following OVT
is used for the complete set.
In case the instructions contained in this manual are not followed, injury or product
damage cannot be excluded.
Missing or insufficient knowledge of the manual leads to loss of liability against
INHECO GmbH.
This manual is part of the OVT and must be retained until the device is disposed of and
must be passed on with the OVT when the device is taken over by a new user.
Manual instructions must be followed in order to limit the safety risk during operation of
the OVT.
Security-related warnings in this manual are classified into 4 hazard levels:
- The signal word WARNING indicates hazards which – without precautionary
measures – can result in death or serious injuries.
- The signal word CAUTION indicates hazards which – without precautionary
measures – can result in minor to moderate injuries.
- The signal word NOTE stands for the general precautionary measures that have to
be taken to avoid damaging the device.
- The signal word NOTICE stands for the general measures that help using the device.
Contact INHECO in case there are any uncertainties of how to operate or how to handle
the OVT device.
Your opinion about this manual provides us with valuable insights on how we can
improve this document. Please do not hesitate to direct your comments to