Appendix
27
iPoMan 8000
Error codes
Note:
iPoMan 8000 detects the phase of the input source automatically. If the phase
is opposite to that of the outlet phase, the outlet is turned off. The corresponding
error code is displayed on the input power status indicator on the front panel with the
error code and a message is displayed in a pop-window from your browser. The log
is updated with information about this event. To prevent this condition from occur-
ring, select the
Control Group
submenu under the
iPoMan Configuration Menu
and set the
Input Phase Detection
item to
Disabled
.
Description
Error code
Network link down
E01
Parameters checksum error
E02
Input voltage over threshold high (Volt)
E03
Input voltage over threshold low (Volt)
E04
Outlet A current over threshold (Amp)
E05
Outlet B current over threshold (Amp)
E06
Outlet C current over threshold (Amp)
E07
Outlet D current over threshold (Amp)
E08
Outlet E current over threshold (Amp)
E09
Outlet F current over threshold (Amp)
E10
Outlet G current over threshold (Amp)
E11
Outlet H current over threshold (Amp)
E12
Input source abnormal (for 110V model)
E13
Input source abnormal (for 220V model)
E14
Input current sensor value abnormal
E15
Input source phase incorrect (see note below)
E16
Summary of Contents for iPoMan 8000
Page 1: ...iPoMan 8000 User Manual...
Page 2: ......
