Inglesina Culle Carrycots, Instruction Manual

Page: 14 / 88

14
EN
HOW TO HOOK THE HOOD
Insert the two ends A in the suitable seats in
the carrycot.
Hook the buttons located externally in the
head side of the carrycot.
HOW TO RELEASE THE HOOD
Press in correspondence of the joint and
remove temporarily the hood.
HOOD ADJUSTMENT
Accompany the hood in the desired position.
Where present, bend first the compass
B that
maintains blocked the hood.
FASTENING THE COVER
Fasten all buttons of the cover to the carrycot.
REMOVING THE INTERNAL LINING
It is possible to remove the internal lining as
shown in the figure.
ADJUSTING THE BACKREST
Operate on the lever C to adjust the backrest:
once you reach the desired inclination, re-
position the bar in the starting position.
INTERNAL VENTILATION
It is possible to adjust internal ventilation
through the lever
D.
TRANSPORT HANDLES
Extract the transport handles from the side
pockets.
CAUTION: when you transport the carrycot
maintain it always in horizontal position.
HOOKING THE CARRYCOT TO THE FRAME
The carrycot is hooked to the frame thanks
to the patented system EASY CLIP: position
correctly the carrycot on the frame until you
fell a hooking CLICK.
CAUTION: make sure that the carrycot is
always correctly hooked before use.
RELEASE OF THE CARRYCOT FROM THE
FRAME
Insert the two hands into the side openings: act
on the two levels and thus remove the carrycot.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
HOW TO HOOK THE HOOD
Lift the big handle acting on the side buttons
at the same time.
Hook the press studs to the structure of the
carrycot.
Wrap the hood around the handle, fixing it with
suitable buttons.
HOOD ADJUSTMENT
Act on the two side buttons of the big handle
at the same time.
FASTENING THE COVER
Fasten all buttons of the cover to the carrycot.
REMOVING THE INTERNAL LINING
It is possible to remove the internal lining as
shown in the figure.
ADJUSTING THE BACKREST
Operate on the lever C to adjust the backrest:
once you reach the desired inclination, re-
position the bar in the starting position.
INTERNAL VENTILATION
It is possible to adjust internal ventilation
through the lever
D.
TRANSPORT BIG HANDLE
Hold the big handle passing with the hand
through the padding.
CAUTION: when transporting the carrycot,
keep it always in horizontal position.
HOOKING THE CARRYCOT TO THE FRAME
The carrycot is hooked to the frame thanks
to the patented system EASY CLIP: position
correctly the carrycot on the frame until you
fell a hooking CLICK.
CAUTION: make sure that the carrycot is
always correctly hooked before use.
RELEASE OF THE CARRYCOT FROM THE
FRAME
Act on the lever E located externally to the feet
side and lift it at the same time grabbing it from
the big handle.
WITHOUT HANDLE WITH BIG HANDLE
INSTRUCTIONS