ABV2012IQM01_ - Installation and Operation Manual
3.1.9. Hang the charger from the bushing
Hang the charger on the upper screw bushing.
3.1.10. Fix the charger to the wall
1. Fit the three screws on the lower part of the charger and tighten them firmly.
2. Fit the caps to cover the three screws.
FRONTAL
Wall mounting: 4.8x90 screw
STAND assembly: M5x70 screw
1
2
3.1.11. Supply power to the charger
Close the cut-off element of the electrical circuit that powers the charger.
3.2. Installation of the CURVE device
CAUTION
The CURVE device is designed to be used with the NEO Pro charger (single-phase).
14
Installation
Ingeteam