Operation & Maintenance Manual
Installation
22
23221138 (12-07) Rev A
Installation
System Description - General
The VHP40RMD and VHP40RMG units are semi-packaged, or (optionally) totally self-
contained utility mount, reciprocating type, engine driven, air cooled air compressors. Each
unit is designed to operate at ambient temperatures from -10° F to 125° F (-23.3° C to 51.7° C).
Each model includes a 2-stage, 4-cylinder reciprocating air compressor, either a diesel or
gasoline driven engine with attached radiator and fan, compressor and engine air inlet
systems, a compressor lubricating oil system, a compressor discharge system, belt drive
system, electric compressor cooling fan, as well as basic instrumentation. An electric starter
with onboard battery) is standard equipment. Separate air cleaners for the engine and each
bank of the compressor are installed, and a service reminder is fitted on the engine air cleaner.
Basic instrumentation includes compressor discharge air pressure gauge, hour meter,
warning lights for engine oil pressure, engine coolant temperature, and alternator output.
There is a safety shutdown system that monitors and stops the compressor in the case of high
engine coolant temperature, high compressor discharge temperature, or low engine oil
pressure. A starting bypass switch is provided in order to bypass the shutdown system during
starting until the engine oil pressure is high enough to activate the engine oil pressure switch.
The enclosure cabinet, in which the components are mounted, is of heavy gauge sheet steel
and is equipped with easy opening access panels for performing routine maintenance
functions.
The compressor module includes either a three cylinder gasoline engine or a three cylinder
diesel engine driving the air compressor pump via a double Powerband type "B" section belt
type construction.
The drive belt system includes a heavy-duty tension-side idler pulley, the purpose of which is
to reduce vibration and pulsation in the belt.
The compressor pump is a high efficiency, air cooled Ingersoll Rand manufactured two stage
reciprocating unit, with duplicate low pressure and a high pressure stages on either side of twin
banks in a 90 degree “V” layout. The pump features intercooling for both banks. Valve
durability is increased through the use of travel limiters on all intake and exhaust stainless
steel reed-type valves. Lubrication is splash type with mandatory use of synthetic oil.
Construction is heavy duty cast iron throughout.
Belt tension is adjustable using a convenient pair of tensioning bolts, which are adjusted after
loosening the four bolts that secure the motor bracket and air pump.
The compressor pump, engine, and drive system are fixed rigidly within relation to one another
on a sub-base. This sub-base is mounted on four vibration isolators, which in turn are attached
to the main base. This insolates shock and vibration from the main base and housing of the
unit, and in turn from the vehicle to which the unit is mounted. This provides simplicity of
mounting the compressor to the vehicle, as the rigid frame can be bolted directly to the body.
The discharge pressure of the compressor can be operated anywhere between 0 and 175
psig. Cooling for both the compressor and the hydraulics is sufficient for continuous operation
at full load.
Summary of Contents for VHP40RMD
