27
MAINTENANCE SECTION
TROUBLESHOOTING
(Continued)
9.
Tool outputs high torque.
Is the shutoff brake functioning
properly?
Is the Clutch properly lubricated?
Is there wear on the face of the
spindle washer?
Tool outputs low torque.
Is the Clutch Housing Assembly
joint tight?
Refer to problem No. 5 to check shutoff brake malfunctions.
No lubrication on the Clutch components; lubricate the clutch
with recommended grease.
Spindle Washer is worn; replace the spindle washer.
Clutch Spring is damaged; replace the Clutch Spring.
Loose joint between the Gear Case and Clutch Assembly;
tighten the joint with a torque wrench to the specificed
torque.
1. Cam is worn; replace the Cam.
2, Clutch Spring is damaged; replace the Clutch Spring.
3. Cam Guide is damaged; replace the Cam Guide.
Yes
No
No
No
Yes
No
Yes
Yes
10.
