Ingersoll-Rand Schlage L Series, Service Manual

Page: 103 / 148

L-Series Service Manual
97
Trim Options
Coin Turn Coin Turn and Plug
"Do Not Disturb"
Indicator "Occupied"
Indicator
L283-124 09-900 x XL12-196 09-611 09-611 x L583-375
DO NO
T DISTURB
OCCUPIED
Coin turn for rose trim.
Specify fi nish and door
thickness. Available with Torx
screws, specify L283-065. Specify dimension, fi nish
and door hand. If handing
is not required, specify NH
(non-handed).
Thumbturn ADA Cylinder Turn Cylinder Turn
09-509 XB11-720 09-900
Thumbturn for deadbolt functions and
privacy locks with rose trim. Specify
fi nish and door thickness. Available with L463 and L9463 locks.
Specify per XB11-720, dimension, fi nish
and door hand. If handing is not required,
specify NH (non-handed). When ordered
alone, specify either 09-900, 09-904,
09-905 or 09-907 per XB11-720. 09-900 through 09-907 Cylinder
Classroom turns are furnished with L463
and L9463 locks. Specify dimension,
fi nish and door hand. If handing is not
required, specify NH (non-handed). For
handing instructions, see page 118.
"EZ" Thumbturn (ADA) for
Rose Trim "EZ" Thumbturn (ADA) x Knob/
Lever with L or N Escutcheon "EZ" Thumbturn (ADA) x Blank
with L Escutcheon
09-509 per L583-363* 09-633 per L583-363* 09-634 per L583-363*
L N
Not available for L463 or L9463 functions. Not available for L9463 functions. Not available for L9463 functions.
* EZ Turn is not available on doors less than 1
⁵⁄₈
" thick.
NOTE: When ordering trim parts, specify the complete design and fi nish (e.g. 09-633-03L 605).