Ingersoll-Rand Monarch 18 Series, Installation Instructions Manual

Page: 3 / 16

3.1. TAPE DRILLING TEMPLATE (PAGE 15 OR PAGE 16) ON DOOR USING MOUNTING C AND DEVICE REF. C
FROM STEP 2 (PAGE 2).
3.2. PREPARE HOLES:
3.2.1. PREPARE OTHER HOLES PER TABLE BELOW.
3.2.2. TAP HOLES AS REQUIRED.
3.2.3. REMOVE TEMPLATE.
L L
VERTICAL CL
C DEVICE REF.
L
3.3. IF USING OUTSIDE TRIM, PREPARE DOOR USING SEPARATE TRIM DIRECTION SHEET. FOR SEX BOLT
INSTALLATIONS, DRILL 3/8” DIAMETER HOLES ON TRIM SIDE OF DOOR ONLY (SEE FIGURE BELOW).
3.4. DETERMINE DEVICE LENGTH:
DEVICE CAN BE TOUCHBAR DEVICE
CUT DOWN?
SIZE LENGTH
SHORT DEVICE NO 20-1/2” 32-1/2”
LONG DEVICE YES 26-1/2” 44-1/2”
YES 20-1/2” 44-1/2”
DEVICE
TOUCHBAR
LENGTH
DEVICE LENGTH
LHR
SHOWN
SHORT TOUCHBAR
W/LONG CHANNEL
3
DOOR AND HARDWARE PREPARATION
C DEVICE REF.
L
C VERTICAL
L
3/8” DIA. HOLE
4 PLACES
C DEVICE REF.
L
C VERTICAL
L
1/4” DIA. HOLE
4 PLACES
TRIM SIDE OF DOOR
DEVICE SIDE OF DOOR
LHR
SHOWN
DEVICE FUNCTION PREPARE HOLES ON TEMPLATE
DX-(F)18-R-N NONE
DX-(F)18-R-C A
DX-(F)18-R-NL A
DX-(F)18-R-TP B, C (ALL DOORS) + E (WOOD DOORS)
DX-(F)18-R-TP2 A, B, C (ALL DOORS) + E (WOOD DOORS)
DX-(F)18-R-TP(2O.C.) A, B, C (ALL DOORS) + E (WOOD DOORS)
DX-(F)18-R-K
B, D (ALL DOORS) + E (WOOD DOORS)
DX-(F)18-R-K2 A, B, D (ALL DOORS) + E (WOOD DOORS)
DX-(F)18-R-K(2O.C.) A, B, D (ALL DOORS) + E (WOOD DOORS)
DX-(F)18-R-L B, D (ALL DOORS) + E (WOOD DOORS)
DX-(F)18-R-L2 A, B, D (ALL DOORS) + E (WOOD DOORS)
DX-(F)18-R-L(2O.C.) A, B, D (ALL DOORS) + E (WOOD DOORS)
D-1400- 4 Page 3 of 16