DELAYED EGRESS
18 SERIES RIM PANIC
AND FIRE EXIT DEVICES
DX-F-18-R
Date:
D-1400-4
3-06-2008
DX-18-R
INSTALLATION INSTRUCTIONS
1
PARTS CHECK
1
1.1.
MAKE SURE THE CORRECT DEVICE AND TRIM (IF APPLICABLE) ARE BEING USED AND ARE THE
CORRECT HAND (SEE PAGE 11 FOR REVERSING INSTRUCTIONS).
1.2.
MAKE SURE ALL NEEDED PARTS ARE ON HAND.
NOTE:
LIST DOES NOT REFLECT ALL POSSIBLE APPLICATIONS.
1) DX-(F)-18-R DEVICE
NOTE:
SEE PAGE 13 FOR HANDING.
2) STRIKE
570 STD.
PANIC
F-570 STD.
FIRE
F-490 OPT.
FIRE
565 OPT.
PANIC
579 OPT.
PANIC
490 OPT.
PANIC
3) KNOB HUB
FOR KNOB (KE)
AND LEVER (LE)
TRIMS (1 QTY.)
4) POWER SUPPLY (DEX)
WIRING
DIAGRAM
2.0 A FUSE
DELAYED EGRESS
MODULE (DXM)
5) POWER TRANSFER HINGE
8 WIRE, 1.5 A MINIMUM RATED
MUST BE U.L. APPROVED
NOTE:
SUPPLIED BY OTHERS.
6) 18-20 A.W.G. WIRE
NOTE:
SUPPLIED BY OTHERS.
7) 1-1/4” MORTISE CYLINDER
MUST HAVE STANDARD “A” CAM
(APPROX. 5/16” WIDE X 3/4”
LONG); LONGER CYLINDERS
REQUIRE BLOCKING RINGS.
NOTE:
SUPPLIED BY OTHERS.
8) INTERFACE
BOARD AND
CABLE
Copyright © 2006 Ingersoll-Rand Company Limited
9) DX DEVICE
SCREW PACK
#10-24 X 3/8”
PPHMS W/NYLOC
PATCH (2 QTY.)
1/4-20 X 3/4”
TPHMS (1 QTY.)
#10-24 X 3/4”
FPHMS (3 QTY.)
#10-24 X 1”
PPHMS (4 QTY.)
#10-24 X 1-1/2”
PPHMS (2 QTY.)
SEX BOLT, 1/4-20
THREAD (1 QTY.)
CYLINDER NUT
(1 QTY.)
CYLINDER
BRACKET
(1 QTY.)
MOUNTING
BRACKET
(1 QTY.)
CHANNEL
END CAP
(1 QTY.)
CYLINDER LOCK
WASHER (1 QTY.)
#6-32 X 1/4”
PPHMS (4 QTY.)
