Ingersoll-Rand IRN100H-OF, Installation, Operation And Maintenance Manual

Page: 70 / 80

EN
70 80448608 Rev B
MAINTENANCE
MAINTENANCE SCHEDULE
Hours: Daily
150
(1st time
only)
Every 500 Every 2000 Every 4000 Every 6000 Every 8000
Every
16000
Oil filter Change Change † Change Change
Air filter **
Check
Pressure
Change
Check
Pressure
Change Change
Premium Coolant (Ultra)* Check Sample Sample Sample Change Change
Extended life
Premium Coolant (Ultra EL)*
Check Sample Sample Sample Sample Change
Power Drive Module filter * Check Change Change Change Change Change
Hoses *** Check/ clean Check/clean Check/clean Check/clean Check/clean
Pressure relief valve Check Check Check Check Check
Cooler Core(s) Check / clean Check / clean Check/clean Check/clean Check/clean Check/clean
Moisture separator Check / clean Check / clean Check/clean Check/clean Check/clean Check/clean
Motor cowl Check / clean Check / clean Check/clean Check/clean Check/clean Check/clean
Vibration Analysis Analysis Analysis Analysis Analysis Analysis
Coolant Analysis Analysis Analysis Analysis Analysis Analysis
Blower Motor (N90 − 160K / 125 −
200H Only)
Re-grease Regrease Re-grease
Expansion joint bolt torque (if
supplied)
Check Check Check Check Check Check
Condensate stainers Clean Clean Clean Clean Clean Clean
Check valve Inspect Replace Replace
Blowdown valves Inspect Rebuild Rebuild
Airend intake batts ** Check Check Check
Breather Check Check Check Check Check
Food Grade Lubricant (Ultra FG)* Check
Analysis
(Every 1000)
Change
If the compressor is run less than 4,000 hours per year,
* Maintain every 6 months
** Maintain every year
*** Maintain every 2 years
† Change filter if changing Food Grade Lubricant (
Ultra FG)
MAINTENANCE PROMPTS
The service warning and flashing LED will appear at intervals,
dependent on the service level selected. Refer to operating
instructions.
The customer can only reset the warning for 24 hours by
pressing the “set” button.
IR service engineers will master reset the warning after
completing the service work.
The service warning will return each subsequent 2000 hours.
The machine will be master reset after service work
conducted prior to the 2000 hour interval to prevent false
indication.
MAINTENANCE CHART
The MAINTENANCE CHART indicates the various components
and the intervals when maintenance has to take place. Where
a service interval is stated in both hours and months, it is the
sooner of the two intervals that must be adhered to. Coolant
capacities etc can be found in the
Product information sheet .
Note that any Local or National codes that require specific
maintenance that exceeds the requirements of this section
must be adhered to.
RELEASED 06/Feb/2018 13:48:37 GMT