manualshive.com logo in svg

Ingersoll-Rand IRN100H-OF, Installation, Operation And Maintenance Manual

Share
Download
Ingersoll-Rand IRN100H-OF Installation, Operation And Maintenance Manual Download Page 44

EN

44 

80448608 Rev B

WEB ACCESS

LOGIN PROCESS

The server is accessed either by host name or by IP. Accessing by name requires that a router be in the network. During the 
installation and commissioning process a network address was assigned to the CONTROLLER by your IT department.

This address may be a static IP (e.g. http://192.168.2.220, recommended) or a DHCP assigned domain name address (e.g. http://
fenixsim.com). A domain name address is a web page address chosen by the user to represent the controller. The domain name 
must be approved by your IT department but can generally be any text label you wish. You must have this address before you 
can log in to the web pages. See section – Ethernet Configuration.

Please note that Web Pages requires Internet Explorer 8 (or newer) or Mozilla Firefox 5 (or newer). Certain functions may not 
behave correctly when using older browser software.

To log in to the web pages you must first type the address into your browser and then press the enter button. For example, 
with a DHCP enabled controller you might type this:

While with a static IP address you might type this:

If the controller is configured correctly you will then see the web pages in your browser. This may take a few seconds 
depending on your network connection speed.

RELEASED 06/Feb/2018 13:48:37 GMT

Summary of Contents for IRN100H-OF

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands