Ingersoll-Rand IQ V20 Cordless Impactool W5000 Series, User Manual, Page: 27 / 48

EN
48622245_ed5 EN-1
Product Information: Cordless Impact Wrench
Product Safety Information
Intended Use:
These Cordless Impact Wrenches are designed to remove and install threaded fasteners.
WARNING
• Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or
serious injury. Save all warnings and instructions for future reference.
• Responsibly recycle or dispose of Batteries. Do not puncture or burn batteries. Improper disposal may endanger the environment or
cause personal injury .
• Only use Tools with appropriate voltage Ingersoll Rand batteries and Charger. Use of any other batteries may create a risk of fire,
personal injury or property damage.
For additional information, refer to Cordless Impact Wrench Safety Manual Form 04581146, Battery Charger Safety Information
Manual Form 10567832 and Battery Safety Information Manual Form 10567840.
Manuals can be downloaded from ingersollrandproducts.com
Product Specifications
Tool
Model
Voltage
Battery
Model
Drive
Impacts per
Minute
No Load
Speed
Recommended
Torque Range
Max.
Torque
V, DC Type Size bpm rpm ft-lbs (Nm) ft-lbs (Nm)
W5110 20
BL2005, BL2012 Quick Change Hex 1/4” 2800 1700 25-125 (35-170) 165 (225)
BL2010, BL2022 Quick Change Hex 1/4” 2900 1700 25-130 (35-175) 175 (240)
W5130 20
BL2005, BL2012 Square 3/8” 2900 1700 25-135 (35-180) 180 (245)
BL2010, BL2022 Square 3/8” 2900 1700 25-140 (35-190) 190 (260)
W5150 20
BL2005, BL2012 Square 1/2” 2900 1700 25-135 (35-180) 180 (245)
BL2010, BL2022 Square 1/2” 2900 1700 25-140 (35-190) 190 (260)
Tool
Model
Battery
Model
Sound level dB (A)
(EN60745)
Vibration (m/s²)
(EN60745)
† Pressure (L
p
) ‡ Power (L
w
) Level *K
W5110
BL2005, BL2012 84 95 8.1 2.2
BL2010, BL2022 84 95 8.4 2.2
W5130
BL2005, BL2012 91 102 8.8 2.6
BL2010, BL2022 91 102 9.8 1.8
W5150
BL2005, BL2012 91 102 8.8 2.6
BL2010, BL2022 91 102 9.8 1.8
† K
pA
= 3dB measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
* K = Vibration measurement uncertainty
Conforms to UL STD. 60745-1 & 60745-2-2.
Certified to CSA STD. C22.2 No. 60745-1 & 60745-2-2.
Lubrication
Remove hammer case to apply lubrication on the anvil, impact mechanism assembly and gears. Apply grease evenly and sparingly. An
excessive accumulation of grease will result in sluggish operation. See drawing 48380273 and table below. Maintenance frequency is shown in
a circular arrow and defined as h=hours, d=days, and m=months of actual use.
1 8h
1 8h
1
8h
2 8h
(Dwg. 48380273)
1 2
IR# IR#
105 67
Parts and Maintenance
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest
Ingersoll Rand Office or Distributor.