Ingersoll-Rand FA150KGi Series, Product Information

Page: 3 / 16

SPECIFICATIONS
Model Code Explanation
Example: FA150KGiMR12A1-CE FA 150KGi MR 12 A 1 - CE
Series:
FA = Force 5 Infinity Air Powered
Capacity:
150KGi = 330 lbs (150 kg) Man Rider Rating
Designation:
MR = Man Rider
Drum Length:
12 = 12 inch (305 mm) standard
Brakes:
A = Automatic drum band brake and disc brake
Controls:
1 = Winch mounted lever throttle (standard)
Design Temperature:
Blank = 0 degrees C
C1 = - 4° F (- 20° C) ABS
C2 = - 4° F (- 20° C)
DNV
Options:
7 = Drum grooving in sixteenths (e.g. "7" = 7/16")
A = Drum guard with manual rope guide
B = Winch pedestal base
H = Stainless steel braided hoses in lieu of standard rubber on limit switch
K = Stowage valve kit installed on winch
M1 = Material traceability certificates according to EN 10204 (Ex DIN 50049) 2.2 on load bearing parts
M2 = Material traceability certificates according to EN 10204 (Ex DIN 50049) 3.1b on load bearing parts
M3 =
Material traceability certificates according to EN 10204 (Ex DIN 50049) 3.1b on load bearing parts in a finished, as delivered
condition
N1 = ABS (Copy of Type Approval certificates)
N2 = DNV (Copy of Type Approval certificates)
P1 = Marine 812-X paint system (P - Paint standard)
R Emergency lowering system (equipped with 2 liter bottle)
Witness test Specify
W1
= ABS
W2
= DNV
W3
= LRS
W4
= Client witness of load test
–CE = CE Package (Compliance with European Machinery Directive, refer to “DECLARATION OF CONFORMITY” on page 15)
NOTE: Man Rider Winch should only be used for man riding application
Table 2: General Specifications
Air
System
Air Motor Pipe
Inlet Size
Minimum Air
System
Hose Size (inside
diameter)
Drum
Barrel
Diameter
Drum
Flange Diameter
Recomm-
ended Wire
Rope Size
Sound
Pressure
Level
(1, 2)
Sound
Power
Level
(1)
Maximum
Foundation
Anchor Shear
Force at One
Capscrew (3)
Rated Operating
Pressure
Air Consumption
(at rated load)
inch mm inch mm inch mm inch mm mm dBA dBA lbs N
90 psig (6.3 bar)
62 scfm (1.75
cu.m/min)
1.25 NPT 32 0.75 19 10.75 273 19 483 10 85 96 75 334
1. Sound measurements have been made in accordance with ISO 11201, ISO 3744–3746 and ISO 4871 test specifications for sound from pneumatic equipment. Readings shown
are based on the average noise level of each winch configuration, proportionate to the utilized time in a regular cycle.
2. Lcp (Peak Sound Pressure) does not exceed 130 dB.
3. Occurs when wire rope take-off from drum equals zero degree angle of inclination. Values based on wire rope at third layer and rated line pull.
Form MHD56470 Edition 4 3