04585170_ed3
EN-1
EN
Product Safety Information
Intended Use:
These Air Pencil Grinders are designed for precision grinding in confined areas.
For additional information refer to Air Die Grinder Product Safety Information Manual
Form 04580288.
Manuals can be downloaded from www.ingersollrandproducts.com
Product Specifications
Model(s)
Free Speed Collet Size Length
Sound Level dB (A)
(ANSI S5.1-1971)
Vibration
(ISO28927)
m/s²
rpm
inch (mm) inch (mm) Pressure
Power
(ISO3744)
Level
*K
DG600G2,
DG600G2-EU
60,000
1/8 (3)
5 (136)
79
--
3.5
0.8
*K = Vibration measurement uncertanity
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16586349 and table on page 2. Maintenance frequency is shown in
circular arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
6.
Thread size
2. Regulator
7.
Coupling
3. Lubricator
8.
Safety Air Fuse
4. Emergency shut-off valve
9.
Oil
5. Hose diameter
10. Oil - if lubricator (3) is not used
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest
Ingersoll Rand
Office or Distributor.
