2
C950 PLANNING & INSTALLATION MANUAL
TP0029 Rev5
Ó
2000 Ingersoll-Rand Company
Date of Revision: 15 August, 2000
Special precautionary measures include:
·
Eliminate the possibility of power going to the equipment at any time when
maintenance work is in progress.
·
Prevent rotation due to reverse flow.
·
Ensure that the block valve is closed and tagged during maintenance.
In general, all personnel should be guided by the basic rules of safety associated with the
equipment and the process.
Safety Procedures
Throughout this manual, you will encounter boxes with the words WARNING, CAUTION,
and NOTE. These are intended to emphasize certain areas where caution is needed. This
is in the interest of personal safety and satisfactory compressor operation and
maintenance. The definitions of these words are as follows:
WARNING
An operating procedure, practice, etc. that, if not correctly followed, could result
in severe personal injury, or loss of life.
CAUTION
An operating procedure, practice, etc. that, if not strictly observed, could result
in damage to, or destruction of equipment.
NOTE
An operating procedure, condition, etc. that is essential to highlight.
The information in this manual does not relieve operating and maintenance personnel of the
responsibility of exercising normal good judgment in operation and care of the compressor
and its components. We suggest that all personnel follow the safety precautions associated
with this type of equipment.
01_
10 of 41
90.10_Pre-Installation and Operation Manual
