Ingersoll-Rand ARO PZ10A-AS Series, Operator'S Manual

Page: 9 / 16

PZ10X-XXX-XXX-AXX (en) Page 9 of 16
MANIFOLD / FLUID CAP MATERIAL OPTIONS PZ10X-XXX-XXX-AXX
Aluminum Cast Iron Hastelloy-C Stainless Steel Stainless Steel
PZ10X-XAX-XXX PZ10X-XCX-XXX PZ10X-XHX-XXX
PZ10X-ASX-XXX
PZ10X-BSX-XXX
PZ10X-FSX-XXX
Item Description
(size)
Qty Part No. [Mtl] Part No. [Mtl] Part No. [Mtl] Part No. [Mtl] Part No. [Mtl]
63
Pipe Plug
(1 - 11-1/2 NPT)
(2) Y17-125 [A] Y17-55-S [SS] - - - - - - - - Y17-55-S [SS] - - - - - - - -
(R 1, 1 - 11 BSP)
(2) 96160-2 [A] 96160-1 [SS] - - - - - - - - 96160-1 [SS] - - - - - - - -
NOTE:

For NPTF thread models (PZ10X-AXX-XXX-AXX), use “-1”.

For BSP thread models (PZ10X-BXX-XXX-AXX), use “-2”.
PARTS LIST / PZ10X-XXX-XXX-AXX FLUID SECTION
26
63
22 19 21
70
29
69
68
131
180
195
1
5
8
7
6
9
27
33
22 19 21 33
61
60
(PZ10X-FSX) 60
26
63
175
144
27
74
14
15
29
NOTE: DO NOT OVERTIGHTEN FASTENERS.
(14) Screw, tighten to 25 - 30 ft lbs (33.9 - 40.7 Nm).
LUBRICATION / SEALANTS
ASSEMBLY TORQUE REQUIREMENTS
Apply Loctite 242 to threads at assembly.
Apply Lubriplate FML-2 grease to all “O” rings, “U” Cups and mating parts.
(26) Screws, 20 - 25 ft lbs (27.1 - 33.9 Nm).
COLOR CODE
(29) Nuts, 15 - 20 ft lbs (20.3 - 27.1 Nm).
Material Diaphragm
Color
Ball
Color
Hytrel Cream Cream (•)
Nitrile Black Red (•)
Santoprene Tan Tan
Santoprene
(Backup)
Green N/A
PTFE White White
Viton Yellow (-) Yellow (•)
(•) Dot
Apply anti-seize compound to threads and bolt and nut flange
heads which contact pump case when using stainless steel fasteners.
Apply Loctite 271 to threads at assembly.
Note: Lubriplate FML-2 is a white food grade petroleum grease.
(-) Dash
(131) Screws, 12 - 17 ft lbs (16.3 - 23.0 Nm).
Not used with PZ10X-XXX-AXX, -CXX and -GXX
B
B
A A
Apply PTFE tape to threads at assembly.
Torque Sequence
8
1
2
7
10
6
4
9
5
3
FOR THE
AIR MOTOR SECTION
SEE PAGES 10 AND 11
(PZ10X-FSX) 61
Figure 2