Ingersoll-Rand 7-EU Series, Product Information

Page: 3 / 64

80167349_ed2 EN-1
EN
Product Safety Information
Intended Use:
These tools are designed to install or remove threaded fasteners.
For Additional information refer to Air Screwdriver Product Safety Information Manual
Form 04585006.
Manuals can be downloaded from www.ingersollrandproducts.com
Product Specifications
Model Style Clutch
Recommended
Torque Range
(soft draw)
Sound Level dB(A)
(ANSI S5.1-1971
Vibration
Level
(ISO28927)
in-lbs (Nm) Pressure
Power
(ISO3744)
m/s
2
7RALC1-EU Reversible
pistol
Adjustable
cushion
15-75 (1.7-8.5) --- --- < 2.5
7RALC3-EU Reversible
pistol
Adjustable
cushion
15-75 (1.7-8.5) --- --- < 2.5
7RAMC1-EU Reversible
pistol
Adjustable
cushion
20-110 (2.3-12.5) 79.2 --- < 2.5
7RAMC3-EU Reversible
lever
Adjustable
cushion
20-110 (2.3-12.5) --- --- < 2.5
7RLLC1-EU Reversible
lever
Adjustable
cushion
15-75 (1.7-7.4) --- --- < 2.5
7RLMC1-EU Reversible
pistol
Adjustable
cushion
20-110 (2.3-12.5) --- --- < 2.5
7RAMP1-EU Reversible
pistol
Positive jaw 63 (7.2) @ 50 psi
115 (13.1) @ 90 psi
--- --- < 2.5
7RANP1-EU Reversible
pistol
Positive jaw 91 (10.3) @ 50 psi
165 (18.8) @ 90 psi
83.9 94.8 < 2.5
7RALD1-EU Reversible
pistol
Direct
drive
39 (4.4) @ 50 psi
70 (8.0) @ 90 psi
--- --- < 2.5
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install
a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any
hose coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16585762 and table on page 2. Maintenance frequency is shown in a
circular arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter 7. Coupling
2. Regulator 8. Safety Air Fuse
3. Lubricator 9. Oil
4. Emergency shut-off valve 10. Grease - through fitting
5. Hose diameter 11. Grease - disassembly required
6. Thread size