WARNING
Proper support required!
The wall should have the appropriate structure to support the weight of the unit. Failure to do so could cause
the unit to fall and could lead to death, serious injury, or damage to the equipment or on the property.
11
Wall Unit
1. Avoid placing the indoor unit in a location which could obstruct the return or the supply of air.
2. Select a place that allows easy draining of water condensates and allows proper connection with
the outdoor unit.
3. Install the indoor unit away from sources of heat, vapor, and flammable gas.
4. Verify that the installation of the unit complies with dimensions as shown on the installation
diagram.
5. Ensure the availability of sufficient space to allow routine maintenance; the clearance between the
lower part of the indoor unit and the floor should not be less than 66 inches.
6. The place of installment of the unit should be more than 3 feet away from other electronic
appliances which may cause interference such as television sets, audio devices, etc.
7. Select a place that allows easy removal and replacement of air filters.
Location of installation
Indoor unit
Outdoor unit
1. Select a place in which noise and discharge air of the unit does not bother the neighbors.
2. Select a place with sufficient ventilation.
3. Ensure that incoming air and outgoing air are not blocked by some type of obstacle.
4. Select a place capable of supporting the weight and the vibration of the outdoor unit and where
maintenance tasks can be performed with safety.
5. Select a place away from flammable gas and gas leaks.
6. Ensure that the outdoor unit installation complies with the recommended clearances shown in the
corresponding diagram.
7. Place the outdoor unit away from bedroom windows.
NOTICE
The installation of the unit in one of the following locations could cause the malfunction of
the equipment:
1. Places where oil is utilized (machine oil).
2. Coastal locations with high levels of salty air.
3. Places with high levels of sulphuric gas such as areas with thermal sources.
4. Places where high frequency waves are generated by radiocommunication equipment, soldering
and medical equipment.
5. Other unusual places where unit operation could suffer alterations.
WARNING
1. Install the unit in a place that does not allow it to be pitched in excess of 5°.
2. If the location is subject to strong winds, said additional force should be considered to secure the unit
firmly to the base.
Summary of Contents for 4MXW1609A1
Page 13: ...13 Wall Unit 18K 30K 36K ...
