3
PLACING TOOL IN SERVICE
LUBRICATION
Ingersoll–Rand No. 10
Ingersoll–Rand No. 105
Ingersoll–Rand No. 115
Always use an air line lubricator with these tools.
We recommend the following Filter–Lubricator–Regulator
Unit:
International – No. C01–C2–T29
After each 40 000 cycles or each month, whichever
occurs first, lubricate the gear train with Ingersoll–Rand
No. 105 Grease.
After each 50 000 cycles or each month, whichever
occurs first, lubricate the clutch assembly with
Ingersoll–Rand No. 105 Grease or Ingersoll–Rand
No. 115 Grease.
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
FILTER
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
COMPRESSOR
(Dwg. TPD905–1)
SPECIFICATIONS
CONFIGURATION
P = PISTOL
S = STRAIGHT
CLUTCH
A = AUTO SHUT OFF
C = CUSHTION CLUTCH
P = POSITIVE JAW
D = DIRECT DRIVE
FREE SPEED
25 = 2500 RPM
17 = 1700 RPM
10 = 1000 RPM
8 = 800 RPM
TOOL ACTUATION
PS = PUSH TO START
TS = TRIGGER START
LT = LEVER THROTTLE
DRIVE SIZE
Q4 = 1/4” Q.C.
CONFIGURATION
TYPE CLUTCH
MODEL
DRIVE SIZE
TOOL ACTUATION
FREESPEED
– MODEL CODING –
41
S
C
8
PS
Q4
*
Model numbers are limited to catalogued items only.
– EU
(Dwg. TPD1766–EU)
