Instruction Manual/Gebrauchsanleitung S 50 05/2019 V 2.7
Page / Seite 4 / 18
Risk of fire
Explosion
Crushing
Bio hazard
Danger levels
Will lead to severe injuries or death
May lead to severe injuries or death
May lead to light to moderate injuries
May lead to material damage
3.
General safety warnings and instructions
Risk of explosion.
●
Do not operate the device in the vicinity of highly flammable or explosive substances. The
instrument is not explosion-proof.
●
Do not use this device for processing any substances which could generate an explosive atmosphere.
●
Do not use this device to process any explosive or highly reactive substances.
Electric shock as a result of penetration of liquid.
●
Do not allow any liquids to penetrate the inside of the housing
●
Switch off the device and disconnect the power plug before starting cleaning or disinfection work.
The On/Off Switch on the device does not disconnect the device from the power source.
●
Only plug the device back in if it is completely dry, both inside and outside.
Risk from incorrect supply voltage
●
Only connect the device to an AC power source with a protective earth (PE).
●
Only connect the device to voltage sources which correspondent to the electrical requirements on
the type label.
Electric shock due to damage to device or mains cable
●
Only connect the device to the mains supply if the device and the mains cable are undamaged
●
Only use devices that have been properly installed or repaired.
●
In case of danger, disconnect the device from the mains supply by pulling the power plug from the
mains socket or by using the isolating device intended for this purpose (e.g. emergency stop switch)
Lethal voltage inside the device
●
Do not open the device.
●
Ensure that the housing is always closed and undamaged so that no parts inside the housing can be
contacted by accident.
●
Do not allow any liquids to penetrate the inside of the housing.
●
Repairs are only to be carried out by trained service technicians.
