Lane/5000
900021971 R11 000 05/0917
Copyright© 2017 Ingenico
All rights reserved
19
Part n
(grey S
4_4
USB port (optional)
There is an A type USB connector on the terminal, located on the rear
side, below the contactless antenna (see picture hereafter).
Open the rubber trap to access it.
This port manages Host connections, to connect an USB flash drive
or another device.
4_5
Stylus Pen (optional)
The stylus pen and its holder must be installed on the left side of
the terminal.
Remove the adhesive protection, insert the pin of the holder inside
the Kensington hole, and press firmly in place.
A magnet in the holder keeps the stylus in position.
Use the stylus type corresponding to the screen type (resistive or
capacitive)
Part numbers : 296219137 – for resistive stylus kit
(grey
oft Grip)
296219158 – for capacitive stylus kit (RED
Soft Grip)
WARNING
We recommend to the customer to provide guidance to
the cardholder as to avoid having his card close to any
magnets on the device since the card may be damaged.
There is one magnet in the stylus and another in its
holder.
