Ingenico group AXIUM EX6000, User Manual

Page: 13 / 25

13 / 25
4.2.2 MicroSD Memory Card
WARNING/ATTENTION
Switch off the terminal before opening the trapdoor.
Mettre hors tension le terminal avant d’ouvrir la trappe.
MicroSD connector is located inside the terminal, in a
closed compartment.

Turn the terminal and remove the trapdoor.

MicroSD are identified by the engraved marks on the
lower housing.

When introducing a MicroSD in its slot, be sure to put
the cut corner as indicated on the picture.

Close the trapdoor.
The terminal supports MicroSD up to 32GB.
4.3 Battery
4.3.1 Charging the battery

When does the battery need to be charged?

When used daily, the terminal charges its battery each time the power adapter is
connected. Charging starts automatically.

How can the battery be charged?
Using the power adapter

Connect the power adapter to the terminal USB type-C connector located on the left
side of the terminal.

Connect the power adapter to the power supply mains network.

Check the charging status on the top of the screen(it means battery charging).
4.3.2 Installing the battery
WARNING/ATTENTION
Check that the terminal is not connected to the main electric network.
Vérifier que le terminal n’est pas connecté au secteur.

Turn the terminal and remove the trapdoor.