8
Problems and solutions
We indicate faults which can present and their possible solutions:
· Put into operation the thermostat, pilot does not light up:
- Check that the mains switch is connected.
- Check for voltage in the mains.
- The pilot lamp is burned out.
Solution:
replace the pilot.
· The thermostat does not cut current when the plate reaches the selected temperature:
- Check that the thermostat bulb is in your accommodation.
- The thermostat bulb is broken.
Solution:
replace the thermostat.
· The plate does note never reach the selected temperature:
- Check voltage reach resistances.
- Check if it is melted any resistance
Solution:
replace the melted resistance.
For these cases, or for any other type of damage to this appliance, must be put in contact with
our nearest SERVICE.
WARNING
The manufacturer will not be held responsible for any non-approved modifications.
The manufacturer will not be held responsible for any damage produced by misuse of
the appliance.
The manufacturer will not be held responsible for the operations and quality of the
appliance if the operating and maintenance instructions detailed above, are not observed.