Thermography System VarioCAM
®
HD
9
. Introduction
74
© InfraTec GmbH 2016
User Manual
Two (different) alarm conditions can each trigger different actions or can also be logically linked together
(AND/OR). Several actions are selectable for each condition. When selecting AND linkage it means both
alarm conditions must be met. Only then both conditions will be run for the set alarm actions. When
selecting OR linkage it means that only one condition must be met. Only the selected condition will be run
for the set alarm condition. Different audio signals are displayed for Max >, Avg >, Avg < and Min <4 as
audio alarm so that an acoustic differentiation of various alarms is possible. When selecting OSD, the
alarm is shown on the display/viewfinder.
Fig. 174 Alarm indication when the average value is exceeded
9.4.7
Menu item "Configuration"
You can save your individual device settings as device configuration in the VarioCAM
®
HD. This way, you
can configure and, if required, reload user and/or application profiles matching different requirements.
Additionally, you can define actions the camera is to perform when the system is started. These actions
are also saved to the corresponding configuration.
Fig. 175 Menu item "Configuration"
The "Configuration" menu item contains the following sub-menus:
■
Load configuration
■
Save configuration
■
Load default
InfraTec
Summary of Contents for VARIOCAM HD
Page 2: ...I n f r a T e c ...
