![background image](http://html.mh-extra.com/html/infratec/infratec/infratec_operating-instructions-manual_2058442014.webp)
Operating Instruction for VarioCAM®
5 Starting Up
10
© InfraTec GmbH 2007
Operating Instructions
5
Starting Up
5.1 Preparations
5.1.1
Carrying Belt Adjustment
The fixing of the carrying lace is explained by the following draft.
Fig. 1 First step:
The lace is to be pulled through
the flap at the back of the
camera by approx. 10 cm from
the top side.
Fig. 2 Second step:
The loose end of the lace is
pulled through the sleeve which
then is pressed at the flap at the
camera.
Fig. 3 Third step 3:
The other side of the lace is to
loosen at the lock.
Fig. 4 Fourth step 4:
The short side of the lace is also
pulled through the lock.
Fig. 5 Fifth step:
The short side of the lace (down
side at the lock) is pulled
through the lock and fastened.
Only one flap is to be seen.
Fig. 6 Last step:
The long side of the lace (upper
side of the lock) is pulled through
the lock and fastened. No flap is
to be seen any longer.
Advice: The loose end of the lace should always be
³
5 cm off the lock!
InfraTec
Summary of Contents for InfraTec
Page 2: ...I n f r a T e c ...