![background image](http://html.mh-extra.com/html/infratec/infratec/infratec_operating-instructions-manual_2058442087.webp)
Operating Instruction for VarioCAM®
11 IRBIS® remote Software
Operating Instructions
© InfraTec GmbH 2007
83
User Interface
Fig. 185 Program user interface IRBIS
â
remote
Depending on the activated components (see chapter 11.1.1 page 73), the appearance of the user
interface can vary. If all components are activated, the view shown in Fig. 185 appears. If only the
analogue video component is activated, the parts for remote control of the camera are removed and the
window shown on the left of Fig. 185 is displayed. If only the part necessary for remote control and
without the analogue video display, the appearance is like that shown on the right Fig. 185.
Fig. 186 Toolbar with special buttons
An additional change in the appearance happens if the "Special Buttons" were disabled in the
configuration. Then, the toolbar shown in Fig. 186 is not displayed. As a result, the corresponding
functions are not available.
The "normal" user interface (Fig. 185) is made up of three areas analogue video display, toolbar with
special buttons, and button emulation for remote control.
The analogue video display only displays the image supplied by the camera. The size of the displayed
image can be toggled between ordinary and enlarged resolution (see chapter 11.1.1 page 73).
Both the areas related to remote control toolbar with special buttons and button emulation for remote
control are described in detail in the following Section.
InfraTec
Summary of Contents for InfraTec
Page 2: ...I n f r a T e c ...