infrared industries IR-8400D, Operator'S Manual

Page: 22 / 37

21
M E N U 2
Use the UP or DOWN soft keys to select an action.
Press ENTER to access the menu for that action. Press
EXIT to return to the Standby screen. Select More to go
back to Menu 1.
D I S P L A Y S E T T I N G S – Allows the operator to set degree of Backlight and Contrast. Select the
Light key to change the amount of backlight, the Up key for more contrast, and the Down key for less
contrast. Select EXIT to return to the Standby screen.
C U S T O M I Z E D I S P L A Y – Allows the operator to customize the display on the Standby screen.
Use the ENTER key to select the desired position and the + key to scroll to the desired value using --- to
indicate no value to be displayed.
S Y S T E M I N F O R M A T I O N
–
This screen contains information about your system: PEF (propane
equivalency factor), the serial number and software version. Press DONE to return to the Standby screen.
R E C O R D T I M E – Allows the operator to select a specific recording period or to choose manual
start/stop. To enter the amount of time you wish to record, use the NEXT key to select the desired
position and the + key to scroll to the desired value. If manual operation is desired, specify the value as
0.00. After the time is set, select
EXIT to return to the Standby screen. Once the PUMP is turned on,
RECORD will appear in the lower right corner. Press RECORD when you wish to begin recording. The
recording period will end automatically once the selected time has expired. If you have set the time for
manual control, press
RECORD when you want to stop recording