![InfoTronics IDpunch 7 User Manual Download Page 13](http://html.mh-extra.com/html/infotronics/idpunch-7/idpunch-7_user-manual_2058316013.webp)
©2011, Attendance on Demand
®
, Inc. Information in this document is subject to change without notice.
13
Avoid the following most common mistakes made during the initial phase of enrollment.
Incorrect placement
Finger rotation
. Avoid or minimize finger rotation during enrollment and verification.
Finger condition
. Avoid using a finger that is too wet or dry. Excessive or lacking moisture can
result in poor-quality finger images, characterized by smudged, faded or distorted areas on the finger.
Poor quality finger images
Finger Pressure
. Apply moderate pressure when making contact with the sensor reader. If too much
pressure is applied, the ridges adhere to each other, which is similar to the wet finger image. On the
other hand, if too little pressure is applied, the resulting image is similar to the dry finger. A little
practice is needed for employees to get the feel of it.
Enrolling Employees
Before employees can be enrolled at a time recorder, those employees must have badge numbers and
belong to a clock group that is assigned to the time clock. Then employee finger enrollment can be
performed at the time clock. To enroll an employee, you can use the time clock configuration menu or set
up a function key for enrolling employees.
To enroll an employee using the time clock configuration menu:
1.
Press MENU on the time clock.
2.
Enter the administrator’s PIN to access the IDpunch 7 Finger Reader menu if the menu is locked. The
Enrollment Menu is highlighted.
3.
Press OK. Employee Enrollment is highlighted.
4.
Present the employee badge or enter the employee’s badge number.
5.
Press OK. Follow the following instructions on the display to place or remove the finger on or from
the platen.
First, a notification message, such as “Preparing to enroll 1 of 1 finger(s)” is displayed.
Place the finger on the platen after the message “Place Your Finger Firmly” is displayed.
Remove the finger from the platen after the message “Remove your Finger” is displayed.
Place the finger on the platen again when the message “Place Your Finger” is displayed.