INFOSEC Mod5T User Manual Download Page 78

Page: 78 / 85

INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com

Hot Line

– Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - [email protected] – 03 17 AA 59 201 24

its service age. Or contact service
personnel.

Warning! Parallel Rack Cable
Loosen

As stated.

Check if the Parallel Rack Cable is loose
and contact service personnel.

Warning! Parallel Rack
Config Wrong

Parallel Rack Configure error

Check the Parallel Rack Setting is correct
and contact service personnel.

Warning! Parallel Firmware
Error

Power module parallel firmware error

The firmware version does not support
Rack Parallel feature. Contact service
personnel.

Warning! ID Conflict

Power module ID conflict.

There are two Power Module with the
same ID numbers. Change the repeated
ID to release it. Or contact service
personnel.

Summary of Contents for Mod5T






















































































Search results

Summary of Contents for Mod5T

Reviews:

Related manuals for Mod5T

Brands by name

Popular brands

INFOSEC Mod5T, User Manual

Search results

Summary of Contents for Mod5T

Reviews:

Related manuals for Mod5T

Brands by name

Popular brands