INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – [email protected] – 11 11 AA 68 203 16
46
G
* It shows “Off”, which means
the UPS prestart is successful
H
* It shows Utility input is “0” and
Utility Abnormal.
I
3.5.3.
Check Measured Values & Figures detected by UPS
If you would like to check the measured values & figures detected by the UPS, please use
scroll up
and scroll down
key pads. When you use scroll down key pad, the LCD
display will illustrate as Drawing C (Voltage from Utility Input)
Drawing I1 (Voltage from
Bypass Input)
Drawing J (Frequency from Utility Input)
Drawing K (Frequency from
Bypass Input)
Drawing L (UPS Output Voltage)
Drawing M UPS Output Frequency)
Drawing N (UPS Output Load %)
Drawing O (UPS Battery Voltage)
Drawing P (UPS
Inner Temperature).
I1
* It shows voltage comes from
Bypass Input
J
* It shows frequency from Utility Input.
K
* It shows frequency from Bypass Input.
L
* It shows UPS output Voltage.
M
* It shows UPS output frequency.
N
* It shows UPS output load level (%)
