18
5 Quick Setup FV105 without
infostepper
FV105 is an autofocus type device that offers quick settings . As shown in the figure below,
place the sample to be read within the field of view, and press and hold the button for 10
seconds to execute auto focus first . seconds later, only auto-tuning is performed) . The
success or failure of auto-focus and auto-tuning are indicated by a buzzer and an indicator
light. The success of automatic parameter adjustment is closely related to the quality of
the barcode of the sample read. Under the condition of good quality of barcode
assignment, the success rate of automatic parameter adjustment is high and the process
is faster.
Note: In the image interface of the setting software infostepper , autofocus and
automatic parameter adjustment can also be completed , see Chapter 6.
Press and hold the button for 10 seconds to start
auto focusing and auto parameter adjustment