288713405
45
Modem Connection TELESERVICE
UPS can be controlled through a normal telephone line by means of a remote operator connected
through a PC with modem device, who performs a phone call to the UPS connected number. So
the operator can see all parameters and control the UPS (if permitted from SETTINGS MENU).
7.3.1 Hardware Configuration
All needs for modem connection is as follows :
•
PC
with
modem
•
WINDOWS
98
•
Available UPS control software
•
DUMP modem which is connected to UPS
In order to perform this function, a PC with UPS control software and an external or internal modem
device connected to telephone line are needed.
A standard modem device, configured according to DUMP and auto answer modes, will be installed
on the UPS and, once programmed, will following a telephone call of the PC-embedded modem
,connect the UPS to the telephone line.
7.3.2 Function Principle
The remote operator, by means of a PC and a modem device and using the remote connection
function of the control software, calls the UPS through the number to which this is connected.
The dumb modem device, connected to the UPS, will answer the call and convert the data coming
from UPS serial on the telephone line. This way all measures and controls allowed by the RS232
serial port can be carried out.
7.3.3 SMART Modem Programming (PC modem)
The connected modem to PC (smart modem) will be programmed from UPS control software
automaticly.
B0 E1 F1 M1 Q0 V1 X3
BAUD = 2400
PARITY = N
WORDLEN = 8
DIAL = TONE
&A3 &B1 &C1 &D0 &H1 &I0 &K1 &M4
&N0 &R2 &S0 &T5 &Y1
7.3.4 DUMB Modem Programming
The connected modem to UPS can be program from COMMAND MENU ,ENTER :MODEM INIT
automatically.
But the user can programme this modem from a PC by following options.
B0 E1 F1 M1 Q0 V1 X3
BAUD = 2400
PARITY = N
WORDLEN = 8
DIAL = TONE
&A3 &B1 &C1 &D0 &H1 &I0 &K1 &M4
&N0 &R2 &S0 &T5 &Y1
