inform Infocharger, Manual

Page: 8 / 21

4 INF561-Y01-U105-1-00
3 Installation
Check if the Infocharger has been subjected to any damage before unpacking it. If you notice any
damage, please contact to transport firm. Check if all the additional parts have been supplied with the
battery charger.
Please make sure that the packing contains the following
•
Infocharger
•
User Manual
•
Test Report
Before the installation, please check if your Infocharger is customized following your special
requirements (if any).
In standard battery charger the output voltage and frequency can be adjustable between 0-30Vs and
60-135Vs
.
3rd1 Handling
If needed to move the battery charger, it is obligatory to pack the unit. It is suggested to keep the
original packing.
3rd2 Storage
Please store the battery charger in an environment where the temperature is between –15
°
C and +55
°
C no
receipt of direct sunlight, far from the heating, in a dry place. Environmental humidity must be between %20
and %95 (non-condensing).
3rd3 Positioning
Infocharger and battery cabinet(if any) have to be positioned in an environment;
•
No direct sun access,
•
Must be dry,
•
Far from the heating equipments
•
No excessive dust
•
Well-ventilated
•
In order to maintain adequate ventilation of Infocharger and battery cabinets (if
any), ensure the air vents are not blocked and leave at least 20 cm space at the rear
side of the unit for ventilation.