InfoPrint 6500-v05, User Manual

Page: 175 / 340

Power On ^X: Selects the ignore mode power up condition. Refer to the InfoPrint
6500 Code V Programmer’s Reference Manual for more information.
v
Disable (the default). Does not select the ignore mode as the power-up default.
v
Enable . Selects the ignore mode as the power-up default, and selects the
graphics mode (cc)PY as the power-up default. All characters are ignored until a
(cc)A command is received.
Power On ^F: Enable Free format causes the Code V to ignore carriage returns,
line feeds and all characters below X'20' sent from the host. Refer to the InfoPrint
6500 Code V User’s Manual for more information on Free Format.
v Disable
(the default). Does not select free format as the power-up default.
v
Enable . Selects free format as the power-up default, and selects the graphics
mode (cc)PY as the power-up default.
Power On ^PY: Selects the graphics mode power up condition. Refer to the
InfoPrint 6500 Code V Programmer’s Reference Manual for more information.
v
Disable (the default). Does not select the graphics mode (cc)PY as the power-up
default.
v
Enable . Selects the graphics mode (cc)PY as the power-up default.
Lines Per Inch
Defines the number of lines per inch for the Code V to use. Can also be set by
using the ^@L command. The following number of lines per inch may be selected:
v
6 (the default.)
v
7
v
8
v
9
v
10
Chapter 4. The Configuration Menus
159