background image

• 20 •

Performing Your Test

Testing Blood - Preparation

Lancing device is a convenient medical tool for collecting capillary blood samples for 
glucose monitoring or other tests which require one or two drops of blood. 
Being a more advanced lancing device, it provides ultimate safety and comfort for obtaining 
blood samples. An adjustable tip offers 5 different strength levels of skin penetration for 
individual user’s comfort, while a lancet ejector enables the safe disposal of the used lancet. 
As an added bonus, this also comes with a transparent tip for AST (Alternative Site Testing).

CAUTION

1. Never use a lancet that has been used by someone else. This could lead to contami-

nation.

2. If the lancing device is to be used by another person, the unit must use a new tip or 

properly disinfected

3. Do not leave the lancet in the device after use.
4. A new lancet must only be placed into the lancing device directly before testing.
5. This device has many small parts and could be a choking hazard for children if 

swallowed.

6. In the case of hospital use, hospitals need to observe their own infection control 

protocols in order to avoid any contamination.

7. Always dispose of the used lancet in a biohazard garbage container.

• 21 •

Depth Indicator/Adjustable Tip

Lancet Holder

Clear Tip

Ejection System

Sliding Barrel

Release Button

ɋ

ɍ

Ɍ

Ɍ

Ɍ

ƣ

COMPONENTS

RECOMMENDED AVAILABLE LANCETS

Some general sterilized lancets are  infolet, ELEMENT, Lanzo, Gleenlan BD-Ultra Fine, 
Cleanlet Fine, E-Z Ject,
G-P Lite, Microlet, Monolet, One Touch, Soft Touch, Therasense, Ultra TLC and Unilet GP.
Note: Some less known lancets may not work properly with the due to their dimensions.
Please, contact your supplier to make sure you are using proper lancets

USING THE CLEAR TIP (AST)

1. Place the lancing device and lancet on the skin in the chosen area, press and hold it 

continuously for a few seconds, then push the release button to take a blood sample.

2. Watch through the clear tip until a sufficient blood sample is taken. If there is not enough 

blood, gently massage the area until a sufficient sample is collected.

 

STORAGE  

Products must be stored at room temperature protected from sunlight or moisture.

 

CLEANING AND DISINFECTION

-Clean and wipe the outer part of lancing device once a week at the minimum with a soft 
cloth dampened with mild soap and water. Wash the adjustable tip and clear tip, once a 
week with mild soap. 
-DO NOT immerse the lancing device in water or liquid.
 

WARRANTY

Lancing device has a 2-year warranty from the date of purchase.
A malfunctioning device should be returned to the following address:
address:

Summary of Contents for Element Neo


























Reviews: