• 12 •
Setting Your Meter
The Element
®
NEO Meter has a wide variety of functions to choose. From the setup mode
you can turn activity/meal flags, set the date/time, designate three unique averages, and
set up to five daily alarms.
Power On
Press for 3
seconds at least.
Date / Time
After pressing and
releasing either
▲
or
▼
buttons to set the date
and time, respectively
push button.
User Activity Option
After pressing and
releasing either
▲
or
▼
buttons to turn the User
Activity Option on/off,
push button.
Year
After pressing and
releasing either
▲
or
▼
buttons to set the year,
push button.
User ID Option
After pressing and
releasing either
▲
or
▼
buttons to turn the User
ID option on/off, push
button.
Test Unit
After pressing and
releasing either
▲
or
▼
buttons to set the test
unit(mg/dL or mmol/L),
push button.
• 13 •
Number of days for
average
After pressing and releasing
either
▲
or
▼
buttons to set
the number of days for
average calculation (3
different settings possible),
push button.
Alarm on/off
After pressing and
releasing either
▲
or
▼
buttons to turn the alarm
on/off, push button.
Temperature Unit
After pressing and
releasing either
▲
or
▼
buttons to set
℃
or
℉
and push button.
Alarm time
After pressing and releasing
either
▲
or
▼
buttons to set
the alarm hour and minute,
push button.
Alarm
After programming the
number of desired alarms
(5 alarms possible),push
button.
CAUTION
1. VERY IMPORTANT: Set the right test unit.
Your Element
®
NEO Meter is pre-set to mg/dL as test unit. A wrong test unit will lead
to wrong test result display. Please consult your healthcare professional if you’re not
sure which test unit to use. Without setting the date properly, the average glucose
level and the results in memory will not show proper values. It is recommended to
set the glucose test meter before use and also when new batteries are installed.
2. You cannot test your blood glucose in the setting mode.
3. To turn the meter off during the setup, press for at least 3 seconds.
