September 4, 2012
INFODRAW PMRS-100 User Manual v5.1
34
2-1-1 Setup Server through MRS Service Program:
MRS Server is a TCP and UDP server that serves MRS/PMRS devices and monitor clients. Its
most basic functionality and prime reason for its existence is to distribute video packets
from cellular MRS/PMRS devices with limited bandwidth to a number of monitor clients
observing the video stream. The
MRS Service Program (MRS Server)
under MS Windows OS
takes form of a Windows Service. A Windows Service has no application-like user interface
as does the MRS Monitor Server Application, so it is instead configured using a Web
Administration Interface. This program allows the user to enter the server through the Web
at any location.
To setup the MRS Service Program (Web Admin Interface Server), follow these instructions:
1)
Make sure that both MRS Service setup files
(“Setup_MRS_Service.msi”
and
“setup.exe”)
are placed in the same directory on your server machine.
2)
Run the
“setup.exe”
file.
Locate the installed
MRS Server
folder and run the
“MRS_Service.exe”
file. This will activate
the MRS Server Windows Service Program on your server machine.
The starting point for the web administration interface is the main menu page, reachable at
the following address (enter this address in your web browser):
'serverip' is the IP address of your server. If the server is installed on the machine where the
web browser is open, you may use 'localhost' as the address.
If a secure connection is desired, use the following address:
The
“Server Administor Login”
screen will appear.
Every time the server does not
identify the browser as the
administrator, it requests the user to
enter the administrator's password.
The initial password is
mrs
. The
administrator is required to change
this initial password to a different
one, immediately after first login.