September 4, 2012
INFODRAW PMRS-100 User Manual v5.1
3
Safety Precautions
To prevent damage to your PMRS-100 device or injury to yourself and others, please read
the following safety information prior to using your device.
WARNING
To prevent damage, electric shocks, fires and/or explosions:
Do not use damaged power charger cords or plugs, or loose electrical sockets.
Do not touch the PMRS-100 device or the power charger cords with wet hands.
Do not place or use this product near water or wet locations.
Do not twist, bend, cut or damage the power charger cords.
Do not drop or cause an impact to the PMRS-100 device or the power chargers.
Do not place your device on an object where it is likely to fall. If your device falls, it
may get damaged.
Do not charge the PMRS-100 device with chargers that are not approved by the
manufacturer.
Do not use the PMRS-100 device if the built-in lithium battery is damaged or leaking.
Avoid exposing the PMRS-100 device to very hot or very cold temperatures. Extreme
temperatures may cause deformation of the device and reduce the charging capacity
and/or life of your device/ battery.
Do not use or store your device in dusty or dirty areas.
Do not allow children to use your PMRS-100 device.
When turning the unit on:
To turn the PMRS-100 unit on, locate the ON/OFF switch on the side of the unit.
Carefully
move the switch to the ON position until it clicks and the LED lights turn on.
Repeat the process to turn it off.
Before turning the unit ON, please make sure that the GSM Antenna is connected to
its appropriate antenna connector on the unit. If the SIM card is inserted into the
unit and the unit is turned ON without the GSM antenna being connected, this may
cause harm to the internal cellular modem. Therefore it is recommended to
keep
the GSM Antenna connected all the time.
After turning the unit OFF, please wait until the LED’s on the top of the unit shut off
completely before turning the unit back ON.