manualshive.com logo in svg

InFocus LP740B, User Manual, Page: 5 / 63

Share
Download
InFocus LP740B User Manual Download Page 5

Declaration of Conformity

Manufacturer: In Focus, Inc.
27700B SW Parkway Ave. Wilsonville, Oregon 97070 USA
European Office: Olympia 1, NL-1213 NS, Hilversum, The Netherlands

We declare under our sole responsibility that the LP740B projector conforms to 
the following directives and norms:

Directive 89/336/EEC, Amended by 93/68/EEC
EMI: EN 55022 (1992) Class A
EMC: EN 50082-1 (1992)

IEC 801-2, IEC 801-3, IEC 801-4

Directive 73/23/EEC, Amended by 93/68/EEC
Safety: EN 60950: 1992 + A1 + A2 + A3: 1995

December, 1998

Australian Certification C-tick mark

Trademarks

Apple, Macintosh, and PowerBook are trademarks or registered trademarks of 
Apple Computer, Inc. IBM and PS/2 are trademarks or registered trademarks of 
International Business Machines, Inc. Microsoft, PowerPoint, and Windows are 
trademarks or registered trademarks of Microsoft Corporation. HP is a trademark 
or registered trademark of Hewlett-Packard Company. Sun Microsystems is a 
trademark or registered trademark of Sun Microsystems, Inc. SGI is a trademark 
or registered trademark of Silicon Graphics Incorporated. DEC is a trademark or 
registered trademark of Digital Equipment Corporation. In Focus and LP are 
trademarks or registered trademarks of In Focus, Inc.

Summary of Contents for LP740B
































































Reviews:

No comments