Page 12
Connecting AC power
1)
Connect one end of the AC power cord to the AC In jack on the back of the display.
2)
Connect the other end of the AC power cord to an AC outlet.
3)
Toggle the power switch to the ON position.
4)
Press the power switch. (The LED on the front of the display turns on.)
NOTES:
•
Your display should only be operated from the power source indicated on the label.
•
Always unplug the AC power cord from the power outlet when you are not using your display for an extended period of time.
External PC touchscreen control setup
1)
Connect an external computer to the display using a DisplayPort, HDMI, or VGA cable.
2)
Connect the Type A to Type B USB cable to the USB Type A jack on the computer and to the USB Type B jack on the front or the
side of the display.
3)
The computer can now be controlled by using touchscreen gestures on the display.
TURNING THE DISPLAY ON/OFF
1)
Verify that the power cord is connected to a power outlet and that the power switch is
ON
.
2)
Press the
Power
button on the remote or the right side of the display.
Standby behavior
The display goes into system standby after 20 minutes of inactivity
by default.
To change this behavior, use the Power Save Mode feature in the
menu system.
In addition, the display is equipped with a proximity sensor. Except for the
shaded gray area shown in the illustration, if someone walks within 25' (7.6m) of
the display, the display will automatically come out of standby mode.
30°
3’0” (1m)
Proximity sensor does not work
when standing in this area.
