background image

Page 2

Safety Information

The HD sound bar is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or 
fire. To prevent the HD sound bar from being damaged, the following rules should be observed for its installation, use, and mainte

-

nance. Please Read the following safety instructions before operating the HD sound bar. Keep these instructions in a safe

place for future reference. 

•  To reduce the risk of electric shock or component damage, switch off the power before connecting other components to the HD 

sound bar.

•  Unplug the power cord before cleaning the HD sound bar. A damp cloth is sufficient for cleaning.
•  Do not use a liquid or a spray cleaner on the HD sound bar. Do not use abrasive cleaners.
•  Always use the accessories recommended by the manufacturer to insure compatibility.
•  When moving the HD sound bar from an area of low temperature to an area of high temperature, condensation may form in the 

housing. Wait before turning on the HD sound bar to avoid causing fire, electric shock, or component damage.

•  A distance of at least 3 feet should be maintained between the HD sound bar and any heat source, such as a radiator, heater, 

oven, amplifier etc. Do not install the HD sound bar close to smoke. Operating the HD sound bar close to smoke or moisture may 
cause fire or electric shock. 

•  Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the HD 

sound bar and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the HD sound bar 
in a bookcase or cabinet unless proper ventilation is provided.

•  Never push any object into the slots and openings on the HD sound bar enclosure. Do not place any objects on the top of the HD 

sound bar. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on the HD sound bar.

•  The HD sound bar should be operated only from the type of power source indicated on the label on the AC/DC Adapters. If you 

are not sure of the type of power supplied to your home, consult your dealer or local power company.

•  Only power of the marked voltage can be used for your HD sound bar. Any other voltage than the specified voltage may cause 

fire or electric shock.

•  The power cord must be replaced when using different voltage than the voltage specified. For more information, contact your 

dealer.

•  The HD sound bar AC/DC Adapters are equipped with a three-pronged grounded plug (a plug with a third grounding pin). This 

plug will fit only into a grounded power outlet. This is a safety feature. If your outlet does not accommodate the three-pronged, 
have an electrician install the correct outlet, or use an adapter to ground the HD sound bar safely.

•  Do not defeat the safety purpose of the grounded plug.
•  When connected to a power outlet, power is always flowing into the HD sound bar. To totally disconnect power, unplug the 

power cord.

•  The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-iso

-

lated, dangerous voltage within the inside of the HD sound bar that may be of sufficient magnitude to constitute a risk of electric 
shock to persons.

•  The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and 

servicing instructions in the literature accompanying your HD sound bar.

•  Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
•  The wall socket should be located near the HD sound bar and be easily accessible.
•  Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power
•  cord during electrical storms.Unplug the HD sound bar during a lightning storm or when it will not be used for long periods of
•  time. This will protect the HD sound bar from damage due to power surges.
•  Do not attempt to repair or service HD sound bar yourself. Opening or removing the front cover may expose you to high voltages, 

electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified service personnel.

•  Keep the HD sound bar away from moisture. Do not expose the HD sound bar to rain or moisture. If water penetrates into the HD 

Summary of Contents for INF7020
















Reviews: