Copyright ©2018, Infoblox, Inc.All right reserved.
Active 10/100/1000 iLO/IPMI port
Figure 5
describes DB-9 and RJ-45 connector pin assignments.
Figure 5 DB-9 Console Port and RJ-45 Port Pinouts
DB-9 pin assignments follow the EIA232 standard. To make a serial connection from your management system to the console port, you can use
an RJ-45 rollover cable and two female RJ-45-to-female DB-9 adapters, or a female DB-9-to-female DB-9 null modem cable. The RJ-45 pin
assignments follow IEEE 802.3 specifications.
All Infoblox Ethernet ports are auto-sensing and automatically adjust to standard straight-through and cross-over Ethernet cables.
SFP/SFP+ Ports
The Infoblox 4000 series appliances ship with three or with four (4) SFP or SFP+ transceivers, depending on the appliance model and the ordered
configuration. Depending on the options you have selected, Infoblox 4000 series appliances support the following Infoblox-sold transceivers
shown in
(other supported third-party transceivers are listed in
).
Table 3
Transceivers for 1GbE SFP and 10GbE SFP+ Support
Table 3 SPF/SFP+ Interface Modules Specifications
SFP/SFP+ Interface
Specifications
