5
6. Installation and Wiring
Installation
Note:
Before installation, please ensure the switcher is disconnected from the power supply.
It is recommended that you remove other WiFi hotspot devices nearby (if any) so to prevent potential
interferences on screen projection.
Attaching Antennas
6.1 Attach the antenna provided to the threaded connector, and screw it down in clockwise.
6.2 Repeat the above step for another antenna.
Attaching Installation Brackets
6.3 Attach the installation bracket to the enclosure using the screws provided in the package separately.
6.4 The bracket is attached to the enclosure as shown.
6.5 Repeat steps 1-2 for the other side of the switcher.
6.6 Attach the brackets to the surface you want to hold the switcher against using the screws (provided by
others).
Wiring
Warnings:
Before wiring, disconnect the power from all devices.
During wiring, connect and disconnect the cables gently.
See below application diagram: